Designs & Model Edits
DWG and IFC Guidelines
DWG Guidelines DatuBIM currently supports 2D and 3D DWG designs. However, several recommended guidelines and limitations should be noted: Design Verification: Double-check the design before saving to ensure no extraneous features are present. These ...
Format Requirements for Importing Road/Railway Design XML Files
Upload Design Surface To generate a cross-section volume report, the user is required to upload the 3 design files in XML format. These design files will be uploaded as Surface files. It is important that each file is represented by a single surface. ...
Design File Templates for Grade Checking
Templates for Importing Grade Checking Design Files In the below attached ZIP-file you will find templates for importing grade checking design files. Templates of CAD Designs (DXF) HL-50.dxf is a Horizontal Profile DXF file format VL-50.dxf is a ...
Model Edits (Terrain Filtering)
In this article, we will discuss and give examples on how to filter out noisy areas. Filtering out noisy areas will have an effect on the contour lines display as well as on measurements such as volume calculations. As an example let’s look at the ...
Using Site Design Files (CAD Files) with DatuBIM
In this article, we will discuss and give examples on how to add site design files, how to view them, and how to use them in analysis functions. All actions related to design files are done from the Designs left tab shown below. Adding a design file ...