Design File Templates for Grade Checking

Design File Templates for Grade Checking

Templates for Importing Grade Checking Design Files

In the below attached ZIP-file you will find templates for importing grade checking design files.

Templates of CAD Designs (DXF)

HL-50.dxf is a Horizontal Profile DXF file format
VL-50.dxf is a Vertical Profile DXF file format
SEC-50.dxf is a Cross-Sections DXF CAD file format

Templates of Surface Designs (XML)

top.xml is the top surface in XML file format
bottom.xml is the bottom surface in XML file format
centerLine.xml is a center line polyline in XML file format


    • Related Articles

    • Grade Checking

      Functionality and Purpose The grade checking feature calculates the difference between a 3D layer design and the current construction progress based on measured points. This unique DatuBIM feature enables you to create a digital 3D object model from ...

    • Introducing Surface and Road Grade Checking Reports in DatuBIM

      As part of our ongoing commitment to enhance your construction management experience, we are excited to introduce two new reports in DatuBIM: Surface Grade Checking and Road Grade Checking. These powerful tools are designed to provide you with ...

    • Using Site Design Files (CAD Files) with DatuBIM

      In this article, we will discuss and give examples on how to add site design files, how to view them, and how to use them in analysis functions. All actions related to design files are done from the Designs left tab shown below. Adding a design file ...

    • Format Requirements for Importing Road/Railway Design XML Files

      Upload Design Surface To generate a cross-section volume report, the user is required to upload the 3 design files in XML format. These design files will be uploaded as Surface files. It is important that each file is represented by a single surface. ...

    • Working with Design Files

      DatuBIM gives you the possibility to compare your current site to your designs to discover deviations quickly. This video shows you how to upload design files in DXF format and how to anchor them to the 3D model.