Working with Design Files

Working with Design Files

DatuBIM gives you the possibility to compare your current site to your designs to discover deviations quickly.
This video shows you how to upload design files in DXF format and how to anchor them to the 3D model.


    • Related Articles

    • Using Site Design Files (CAD Files) with DatuBIM

      In this article, we will discuss and give examples on how to add site design files, how to view them, and how to use them in analysis functions. All actions related to design files are done from the Designs left tab shown below. Adding a design file ...

    • Automatic Design Files Synchronization to DatuBIM

      Managing design files for infrastructure projects can be a time-consuming and error-prone process, especially when dealing with long lists of designs, many of which may not be relevant to the end user, and relying on manual workflows like emailing ...

    • Format Requirements for Importing Road/Railway Design XML Files

      Upload Design Surface To generate a cross-section volume report, the user is required to upload the 3 design files in XML format. These design files will be uploaded as Surface files. It is important that each file is represented by a single surface. ...

    • Overlay Your PDF Design on a DatuBIM Model

      Introduction In infrastructure and civil projects, comparing current site conditions against design files is crucial - but not always straightforward. Ideally, CAD design files offer seamless integration with your 3D models, but these are not always ...

    • Design File Templates for Grade Checking

      Templates for Importing Grade Checking Design Files In the below attached ZIP-file you will find templates for importing grade checking design files. Templates of CAD Designs (DXF) HL-50.dxf is a Horizontal Profile DXF file format VL-50.dxf is a ...