Marking an Area of Interest

• Related Articles

• Preparing Flight Missions

  Defining a New Mission To begin planning a new mission tap the ( ) icon on the Main screen, which will open the “Mission Requirements” screen (Figure 29). Figure 29: Mission Requirements Screen Complete all options as described below. Info Specify ...

• Quick Start

  Introduction The section will take you through an example of planning a new mission and running it. The mission we define for this purpose is a circular mission taking oblique images, starting with general and quick one-time settings, and going ...

• Introduction and Overview

  Introduction The DatuFly User Guide will help you:  Understand the principles of operation of the mobile application. Plan and execute your image taking tasks based on the best practice requirements of DatuBIM or DatuSurvey. Within this document, you ...

• Executing Flight Missions

  Introduction Execution of a plan could take place right after a new mission is defined or after opening a saved mission, from the Main Screen ( Figure 3 ). In both cases the execution will start from a screen with the Connect Drone button available ...

• Uploading Flight Areas to Datumate Servers

  Introduction It is possible to define polygonal areas for vertical flight missions or a path for corridor flight missions on Google Earth using standard KMZ/KML formats and upload to Datumate Servers and make them available for import in DatuFly.  ...