Flight Planning – Parameters Settings

• Related Articles

• General Settings

  Introduction Tap the General Settings icon on the top right corner of the Main screen to open the “Settings” page, which includes four sections. Measurements 1.       Select the preferred measurement system: “Imperial” or “Metric”. 2.       Select ...

• Executing Flight Missions

  Introduction Execution of a plan could take place right after a new mission is defined or after opening a saved mission, from the Main Screen ( Figure 3 ). In both cases the execution will start from a screen with the Connect Drone button available ...

• DatuFly - Flight Planning Drone App for High Resolution Photo Shooting

  DatuFly - Flight Planning Drone App for High-Resolution Photo Shooting ​Designed for land surveying, construction, and infrastructure mapping, the DatuFly drone app optimizes flight and image capturing per job type, such as topography, stockpiles, ...

• Preparing Flight Missions

  Defining a New Mission To begin planning a new mission tap the ( ) icon on the Main screen, which will open the “Mission Requirements” screen (Figure 29). Figure 29: Mission Requirements Screen Complete all options as described below. Info Specify ...

• Uploading Flight Areas to Datumate Servers

  Introduction It is possible to define polygonal areas for vertical flight missions or a path for corridor flight missions on Google Earth using standard KMZ/KML formats and upload to Datumate Servers and make them available for import in DatuFly.  ...